Table of Contents
Advertisement
Step 10
continued
Ensure the TF card that comes with
Vision Connect is properly inserted.
TF card (included)
Connect power cable and plug
USB power adapter into outlet.
Vision Connect is now ready to connect to your iOS or Android device.
See troubleshooting on next page if LEDs do not meet the described conditions.
VISION CONNECT HUB SETUP
Connect LAN cable to closest Wi-Fi router
to the Lockly Vision lock (<100ft).
LAN cable (S) (included)
Wait 2 minutes for hub to self calibrate.
Once LEDs turn RED and blink yellow.
22
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Vision and is the answer not in the manual?