Step 8: Installing Batteries - Lockly SECURE Installation Manual

+
-
+
-
+ -
The self-check process is very important step to ensure the installation is done properly.
Double check if the thumb turn key can be turned smoothly after this self-check process.
If not, go through the whole installation process again making sure all the steps are followed
correctly. Do not install battery cover yet.

STEP 8: INSTALLING BATTERIES

First install 3 of the 4 batteries. Before installing the
last battery, press and hold the PROGRAM button
while installing the last battery until you hear a
beep from Lockly .
TM
Lockly will then perform a self check and the
TM
keypad screen will start to initiate. This self check will
automatically determine and set your door lock to a
left open or right open door.