Advertisement
Quick Links
Advertisement
Related Manuals for Lockly VISION ELITE
Summary of Contents for Lockly VISION ELITE
- Page 1 INSTALLATION GUIDE DEADBOLT EDITION...
- Page 2 Go to Lockly.com/installation to watch a video version of this installation guide.
- Page 3 Lockly Vision Elite up and running. ™ Installation generally takes less than 30 minutes. If you have any questions please reference our online support at: Lockly.com/support or call (669) 500-8835 for help. Reference installation parts overview foldout on back page...
- Page 4 Preparation To complete the installation you will need: Tape measure or ruler Aligator Saw (Optional)* Flathead Screwdriver Phillips Screwdriver Prepare door: remove existing deadbolt or use provided template to bore new holes. 2-⅜" (60mm) 2-¾" (70mm) 1-⅜" (35mm) *Optional to 2" (50mm) Cross-bore 1"...
- Page 5 Step 1 ADJUST DEADBOLT AND INSTALL Deadbolt slot must align to the center of the door hole. Adjust as shown if needed. 2-3/4" (70mm) or 2-3/8” (60mm) The deadbolt comes set to 2-3/4" (70mm). Adjust length to 2-3/8” (60mm) if necessary. (wear gloves to protect from possible pinching).
- Page 6 Step 1 ADJUST DEADBOLT AND INSTALL continued Extend the deadbolt by inserting a flat-head Insert the deadbolt into the door edge, screwdriver into the slot and turning clockwise. make sure that the right side is up and the slot is in the vertical position. Secure with 2 screws.
- Page 7 Step 2 INSTALLING EXTERIOR ASSEMBLY (B) Check the exterior assembly (B) alignment to door hole and deadbolt before peeling off film on adhesive strips. Peel film from adhesive strips and make sure torque blade is in the vertical position with the deadbolt extended.
- Page 8 Step 3 INSTALLING INTERIOR ASSEMBLY (G) 1: Check interior mounting plate 2: Align and secure mounting plate with alignment to your door hole before adhesive strips. Guide connection cables securing with adhesive strips. through the hole and secure to the lower left notched hole.
- Page 9 Step 3 INSTALLING THE INTERIOR ASSEMBLY (G) continued Plug the larger cable coming through mounting plate into the interior assembly shown, route to the right of interior assembly Connect screw tightly by hand as shown. Plug to match red side of plug with red on socket then insert tightly.
- Page 10 Step 3 INSTALLING THE INTERIOR ASSEMBLY (G) continued C1+C2 D1+D2 Insert cables into the grooves on the side. Make sure the foam pads attached to the cables are secured to prevent the cables from moving. C1+C2 D1+D2 C1+C2 D1+D2 Tuck cables behind the rectangu- lar cable rail on the interior panel.
- Page 11 Step 3 INSTALLING THE INTERIOR ASSEMBLY (G) continued Torque Blade Thumb turn shaft Align torque blade with thumb turn shaft, make sure both are in the vertical position. Before placing the interior Place the interior assembly Secure the interior assembly assembly onto the mounting against the mounting plate to mounting plate with 2...
-
Page 12: Installing Battery
Step 4 INSTALLING BATTERY Hook for battery (Optional) 1. With door open and deadbolt fully extended, insert lithium battery. Make sure to securely hook the battery on the provided slot of the interior panel. (Optional) Tighten the screw on the right side. - Page 13 Step 5 INSTALLING STRIKE PLATE Use the supplied door strike plate (L) which has the built-in door sensor magnet. If your door gap is larger than 5mm, it is recommended to install Strike Spacer to lessen the gap to ensure the normal operation of the door sensor.
- Page 14 Step 6 SETUP THE HUB To enable video doorbell, live monitoring and voice control with Hey Google and Alexa, you will need to setup the included Vision Connect WI-Fi hub with the Lockly Vision Elite deadbolt smart ™ lock + video doorbell.
- Page 15 Step 7 LOCKLY APP & UNIQUE ACTIVATION CODE Before setting up Vision Connect Hub download the Lockly app on your smartphone. It’s required to finish and setup the connection between hub and lock. Scan, visit app store, or go to Lockly.com/app...
- Page 16 Step 8 APP SET UP Set up an account by registering your Lockly Vision Elite in the Lockly app. Registration is also ™ mandatory to activate your locks warranty. After successful registration, select "add a new device" (you can also get to this from the menu in the top left), select Vision, and follow the step-by-step on screen instructions.
-
Page 17: Location Guidelines
Sometimes distances between hub and lock can vary due to circumstances. If you are having difficulty setting up optimal range of 100/ft or less, we’re here to help. Call our customer care team: (669) 500 8835, or visit Lockly.com/help for suggestions and troubleshooting tips. - Page 18 Step 10 VISION CONNECT HUB SETUP Ensure the TF card that comes with Connect LAN cable to closest Wi-Fi router Vision Connect is properly inserted. to the Lockly Vision Elite lock (<100ft). ™ Always keep the Antenna on UP position...
- Page 19 Step 11 PAIR VISION LOCK TO APP Launch the Lockly App and select "add a new device", then select Vision. You will be prompted to scan the QR code from the Activation Card or Vision Connect Hub (located at the bottom).
- Page 20 VISION CONNECT STATUS & TROUBLESHOOTING STATUS LED INDICATORS After connecting LAN cable and Power ON/ power adapter, wait for 2mins for Solid red ON Successfully paired Vision Connect to self calibrate. Yellow slow blinking Network connected READY TO CONNECT If you experience any of the following, power down and disconnect hub, repeat connection process Pairing / Network Red slow blinking NOT yet connected...
-
Page 21: Voice Control
Amazon Alexa Skill or Lockly Action on Google. TIP: In Google Home or Amazon Alexa app, add Lockly skill for Alexa or Lockly Action on Google, then follow on screen instructions. See full list of commands, help videos, or troubleshooting your Lockly at https://Lockly.com/help... - Page 22 FCC Radiation Exposure Statement Lockly Vision Elite complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with minimum distance 20cm between the radiator & your body.
- Page 23 LAN Cable Power Plug TF Card Activation Card KM3x6mm Screw Pin Key KEEP THIS CARD! ACTIVATION CARD Lockly Vision Elite can be fitted for both right swing doors and left swing doors. ™ LOCKLY.COM | HOTLINE: +1(669) 500-8835 | EMAIL: HELP@LOCKLY.COM...
- Page 24 Bluetooth SIG, Inc. , and any use of such marks by Lockly is under license. Other trademarks and trade names are those of their respective owners. Google, Android, Google Play and Google Home are trademarks of Google LLC.