Vision Connect Status & Troubleshooting - Lockly Vision Installation Manual

VISION CONNECT STATUS & TROUBLESHOOTING
LED INDICATORS
Solid red ON
Yellow rlow blinking
If you experience any of the following, power down and disconnect hub, repeat connection process
Red slow blinking
Red fast blinking
Yellow OFF
Blinking red goes to blue,
then turns OFF
Blue slow blinking
Blue ON
Blinking from red to blue
*Power interruption during firmware update may damage the Vision Connect hub.
Do not interrupt or turn the power off while firmware update is in progress.
HUB
After connecting LAN cable and
power adapter, wait for 2mins for
Vision Connect to self calibrate.
READY TO CONNECT
STATUS
Power ON/
Successfully paired
Network connected
Pairing / Network
NOT yet connected
Pairing unsuccessful
Router or LAN cable issue
NO network connection
Resetting
*
Update in progress
Update Successful
Update has failed
24