Table of Contents
Advertisement
Step 1
Deadbolt slot must align to the center of the door hole. Adjust as shown if needed.
2-3/4" (70mm)
or 2-3/8" (60mm)
The deadbolt comes set to 2-3/4" (70mm). Adjust length to 2-3/8" (60mm) if necessary.
(wear gloves to protect from possible pinching).
B
Push the crank
extend the deadbolt
C
Hold the metal plate
twist the deadbolt body
clockwise till it snaps to 2-3/8"
A
A
to
B
D
C
and
D
ADJUST DEADBOLT AND INSTALL
B
Deadbolt comes set
at 2-3/4" (70mm). To return to
default, while deadbolt
extended, hold the metal
plate
bolt body
wise till it snaps to 2-3/4"
4
B
C
and twist the dead-
D
counter-clock-
D
is
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Vision and is the answer not in the manual?
Questions and answers
I just bought a house that has a Lockly deadbolt lock. The tenant left with the vision connect so I cannot reprogram it. HELP!
The provided context does not contain information on reprogramming a Lockly Vision deadbolt lock without the Vision Connect.
This answer is automatically generated