Terms; Table 6-16 Parameters Of 10 Gbit/S Sfp+ Optical Module - Raisecom ISCOM2600G (A) Series Product Description

Raisecom
ISCOM2600G (A) Series Product Description

Table 6-16 Parameters of 10 Gbit/s SFP+ optical module

Wavelength
Model
(nm)
USFP+- 850
192/M/S
W
USFP+- 1310
192/S1/
SW
USFP+- 1550
192/S2/
SW
USFP+- 1550
192/S3/
SW

6.3 Terms

A
Access Control List
(ACL)
Auto-negotiation
B
Bracket
D
Rx Tx Maximum
type optical optical
power power
(dBm)
PIN -7.3 to - -1.0
1.0
PIN -8.2 to 0.5
0.5
PIN -3.5 to 4.0
4.0
PIN -1.0 to 4.0
4.0
A series of ordered rules composed of permit | deny sentences.
These rules are based on the source MAC address, destination
MAC address, source IP address, destination IP address,
interface ID, etc. The device decides to receive or refuse the
packets based on these rules.
The interface automatically chooses the rate and duplex mode
according to the result of negotiation. The auto-negotiation
process is: the interface adapts its rate and duplex mode to the
highest performance according to the peer interface, that is, both
ends of the link adopt the highest rate and duplex mode they
both support after auto-negotiation.
It is a component at the flank side of the device, used for
installing the chassis into the rack.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Extinction Rx
ratio (dB) sensitivity
3.0 -11.1
3.5 -12.6
6.0 -16.0
9.0 -23.0
6 Appendix
Maximum
transmission
distance
0.3
10
40
80
78