Iscom2648G-4C; Raisecom Proprietary And Confidential; Table 3-23 Leds On Iscom2648G-4C - Raisecom ISCOM2600G (A) Series Product Description

Raisecom
ISCOM2600G (A) Series Product Description
SYS
RPS

3.4.10 ISCOM2648G-4C

Table 3-23 lists LEDs on the ISCOM2648G-4C.

Table 3-23 LEDs on ISCOM2648G-4C

–
Port1–Port48
LNK/ACT
Port49–
Port52
PWR1/2
SNMP
SYS
LED Status
Green
Green
LED Status
Green Ethernet interface working status LED



Green 10 Gbit/s SFP+ interface working status LED



Green Power working status LED


Green SNMP interface working status LED



Green System working LED




Raisecom Proprietary and Confidential

Copyright © Raisecom Technology Co., Ltd.
System working LED
 Green: the system is working improperly.

Blinking green (every 1s): the system has loaded the
configuration file or the device is configured.

Off: the system is working improperly.
RPS power LED

Green: the RPS is supplying power.

Off: the RPS is not supplying power.
Green: the interface is properly connected.
Blinking green: the interface is receiving or sending data.
Off: the interface is disconnected or improperly connected.
Green: the interface is properly connected.
Blinking green: the interface is receiving or sending data.
Off: the interface is disconnected or improperly connected.
Green: the power supply is normal.
Off: the power supply is off, the power module fails, or the
power supply is configured as a single power supply and not
installed.
Green: the SNMP interface is properly connected.
Blinking green: the SNMP interface is receiving or sending
data.
Off: the SNMP interface is disconnected or improperly
connected.
Green: the system is working improperly.
Blinking green (every 1s): the system has loaded the
configuration file or the device is configured.
Off: the system is working improperly.
Description
Description
3 System structure
46