Date And Time - Memmert UN PLUS Series Operating Instructions Manual

Menu functions
2. Save the selection by pressing the
confirmation key. The current selection –
in this example +30 % – is automatically
highlighted.
3. With the turn control, select the desired
new setting, e.g. +50 %.
4. Save the setting by pressing the
confirmation key. The selection returns to
the overview.

7.4 Date and time

DATE AND TIME
In the
savings.
1. Activate the time setting To do so, press
the activation key on the right side of the
DATE AND TIME
enlarged and the first adjustment option
Date
( ) automatically highlighted. On the
right, the current settings are shown.
If you want to change another setting
– e.g. the time zone: Turn the turn
control until the corresponding entry is
highlighted.
2. Accept the selection by pressing the
confirmation key. The first value – in
this case the day – is automatically
highlighted in orange.
3. With the turn control, set the current day,
e.g. 27.
44
display, you can set the date and time, time zone and daylight
display. The display is
IP address
Subnetmask
Unit
Alarm temp
Timer Mode
Balance
DATE AND TIME
Date 12 . 05 . 2012
Time 12 : 00
Time zone GMT +01
Daylight savings
Date
Time
Time zone
Daylight savings
Date
Time
Time zone
Daylight savings
192. 168. 1 0 0 . 100
255. 255. 0 . 0
°C
TWW
+30 %
IP address 192. 168. 1 0 0 . 100
Subnetmask 255. 255. 0 . 0
Unit
°C
Alarm temp
TWW
Timer Mode
Balance
+50 %
IP address 192. 168. 1 0 0 . 100
Subnetmask 255. 255. 0 . 0
Unit
°C
Alarm temp
TWW
Timer Mode
Balance
+50 %
Date 12 . 05 . 2012
Time 12 : 00
Time zone GMT +01
Daylight savings
. 05 . 2012
12
12 : 00
GMT +01
27 . 05 . 2012
12 : 00
GMT +01
F
TWB
F
TWB
F
TWB