Basic Operation In Menu Mode Using The Example Of Language Selection - Memmert UN PLUS Series Operating Instructions Manual

Menu functions
7.2 Basic operation in menu mode using the example of language
selection
In general, all settings in menu mode are done just like in manual mode: Activate the
respective display, use the turn control for setting and press the confirmation key to accept
the change. A more detailed description is provided in the following, using the example of
language selection.
1. Activate the desired parameter (in this
example the language). To do so, press
the corresponding activation key on the
left or right of the respective display. The
activated display is enlarged. The setting
currently active – in the example to the
Deutsch
right (German) – is highlighted
in colour and indicated by a check mark.
If you want to exit or cancel your settings,
again press the activation key which
you have used to activate the display.
The appliance returns to the menu
overview. Only the settings that you have
confirmed by pressing the confirmation
key before cancelling the setting
procedure are accepted.
2. With the turn control, select the desired
new setting, e.g. Español (Spanish).
3. Save the setting by pressing the
confirmation key.
4. To return to the menu overview, press the
activation key again.
You can now
►
activate another menu function by
pressing the corresponding activation
key or
►
return to manual mode by pressing the
MENU key.
38
LANGUAGE
O O O N O O O ON N N N N
English
Deutsch
English
Français
Deutsch
Español
Français
Español
IP address
Balance
Subnetmask
IP Adresse
Unit
Einheit
Alarm temp
Alarm Temp
Timer mode
Timer Mode
Balance
English
Deutsch
Français
Español
DATE AND TIME
SIGNALTÖNE
SETUP ADJUST
LANGUAGE DATE AND TIM SIGNALTÖN
SETUP ADJUS