Memmert UN PLUS Series Operating Instructions Manual page 3

About this manual
Purpose and target group
This manual describes the setup, function, transport, operation and maintenance of universal
ovens UN /UF , sterilisers SN
PLUS PLUS
by trained personnel of the owner, who have the task of operating and/or maintaining the
respective appliance.
If you are asked to work on the appliance, read this manual carefully before starting.
Familiarise yourself with the safety regulations. Only perform work that is described in this
manual. If there is something you do not understand, or certain information is missing, ask
your superior or contact the manufacturer. Do not do anything without authorisation.
Versions
The appliances are available in different configurations and sizes. If specific equipment
features or functions are available only for certain configurations, this is indicated at the
relevant points in this manual.
Due to individual configurations and sizes, illustrations in this manual may be slightly different
from the actual appearance. Function and operation are identical.
Other documents that have to be observed:
►
For operation of the appliance with MEMMERT AtmoCONTROL, observe the respective
software manual
►
For service and repair (see page 53), please refer to the separate service manual
Storage and forwarding
This instruction manual belongs with the appliance and should always be stored where
persons working on the appliance have access to it. It is the responsibility of the owner to
ensure that persons who are working or will work on the appliance are informed as to the
whereabouts of this instruction manual. We recommend that it is always stored in a protected
location close to the appliance. Make sure that the instruction manual is not damaged by heat
or humidity. If the appliance is sold on or transported and then set up again at a different
location, the operating instructions must go with it.
/SF and incubators IN
PLUS PLUS
About this manual
/IF . It is intended for use
PLUS PLUS
3