Storage After Delivery; Setting Up - Memmert UN PLUS Series Operating Instructions Manual

Delivery, transport and setting up

3.5 Storage after delivery

If the appliance is first to be stored after delivery: Read the storage conditions from page 54.

3.6 Setting up

Warning!
Due to their centre of gravity, appliances of certain sizes can
fall over to the front and injure you or other people. Separately
packaged fastening material is included in the scope of delivery of
the appliances concerned. After setting up the appliance, use this
fastening material for mounting the appliance's rear side to a wall.
Observe the assembly instructions provided.
The installation site must be flat and horizontal and must be able to reliably bear the weight
of the appliance (see "Technical data" on page 14). Do not place the appliance on a flammable
surface.
Depending on the model (see nameplate), a 230 V, 115 V or 400 V power connection must be
available at the installation site.
The distance between the wall and the rear of the appliance must be at least 15 cm. The
clearance from the ceiling must not be less than 20 cm and the side clearance from walls or
nearby appliances must not be less than 5 cm (Fig. 9). Sufficient air circulation in the vicinity of
the appliance must be guaranteed at all times.
Fig. 9 Minimum clearance from walls and ceiling
18