Setup; Overview; Ip Address And Subnet Mask - Memmert UN PLUS Series Operating Instructions Manual

All other settings can be made accordingly. The settings possible are described in the
following sections.
If no new values are entered or confirmed for approx. 30 seconds, the appliance
automatically returns to the main menu and restores the former values.

7.3 Setup

7.3.1 Overview

SETUP
In the display, you can set the following parameters:
IP address
►
the
a network)
Unit
►
the of the temperature display (°C or °F, see page 40)
Alarm temp
►
: the temperature protection class according to DIN 12 880:2007-5 (TWW or
TWB, see pages 41 and 28)
Timer mode
►
the
►
the heat output distribution (

7.3.2 IP address and subnet mask

If you want to operate one ore more appliances in a network, each appliance must have its
own unique IP address for identification. By default, each appliance is delivered with the IP
address 192.168.100.100.
AtmoCONTROL G e r ä t Programm P r o o t k o l l D u r c k e n E i n s e t l l u n g e n H i f l e
INP 250 Test 01
Programmname
180
.0°C
STAND BY
15 15
i
HPP 250 Labor
37 .0°C
44 i
.4 %rh
- - + +
Fig. 22 Operation of several appliances in a network (schematic example)
Subnet mask
and
(see page 42)
Balance
Editor Simulation Protokoll
192.168.1 192.168.1.216
of the appliance's Ethernet interface (for connection to
, see 43)
Menu functions
39