Graph; Ending Operation - Memmert UN PLUS Series Operating Instructions Manual
Hide thumbs
Also See for UN PLUS Series:
- Quick manual (29 pages) ,
- Operating instructions manual (60 pages)
Table of Contents
Advertisement
In the menu, you can set:
►
which type of protection (TWW or TWB) should be active (see page 41)
►
if an acoustic signal should be triggered on alarm (see page 49)
5.6 Graph
GRAPH
The
display provides an overview of the chronological sequence of the actual values
as a curve.
1. Press the activation key to the
GRAPH
right of the
The display is enlarged and
the temperature profile
shown.
►
To change the time frame to
be displayed: Press the activa-
tion key next to the ar-
row symbols. The time frame
to be displayed can now be
changed by turning the turn
control.
►
To extend or reduce the time
frame to be displayed: Press
the activation key next to the
magnifying glass symbol.
With the turn control, select
if you want to zoom in or out
(+/–) and confirm your selec-
tion by pressing the confirma-
tion key.
To close the graphical representation, again press the activation key which you have used to
activate it.
5.7 Ending operation
Warning!
Depending on the operation performed, the surfaces in the working
chamber and the chamber load may still be very hot after the appli-
ance is switched off. Touching these surfaces can cause burns. Wear
heat-resistant protective gloves or wait until the appliance cools
down. To do so, pull the handle bar until the door springs open into
its ventilating position (see page 21).
1. Switch off active appliance functions
(turn down the heating, deactivate the
fan etc.).
2. Remove the chamber load.
3. Switch off the appliance (Fig. 20 ).
°C
100
display.
80
60
40
20
0
4
8
14.00
16.00
2012
.2010 20:34
12:33
12.Sept.2012
12:33
Fr 20.10.2010 20:34
12 16 20 24
18.00
°C
12.Sept.2012
100
80
60
40
20
0
4
8
12 16 20 24
14.00
16.00
Fig. 20
Switch off appliance
Operation and control
Fr 20.10.2010 20:
12:
18.00
O
O
O
O N
O
O
ON
N
N
N
N
33
Advertisement
Table of Contents
