Appendix 2: Remote Terminal Instructions - Lilliput RM-1731S User Manual

Appendix 2: Remote Terminal Instructions

 Cross-connection network cable
1) Connect LAN Port on the device to PC network interface by using network cable.
2) Manually configure the IP of the computer which the monitor needs to connect to: xxx.xxx.xxx.xxx
3) Install the Net framework（The device uses OS Win 8 and above do not need to be installed as it
ships with this framework.）
Note: The device uses OS below Win 8 need to be pre-installed framework
"dotNetFx40_Full_x86_x64.exe".
21