Netbackup 5330 Appliance Ethernet Port Configurations - Symantec NetBackup 5330 Product Description Manual

NetBackup 5330 Appliance Ethernet port configurations

Factory-available PCIe slot configurations for the NetBackup 5330
Table 1-6
server
Model Slot 1
A FC HBA
B FC HBA
C FC HBA
D FC HBA
E FC HBA
See "NetBackup 5330 Appliance Ethernet port configurations"
The rear panel of the NetBackup 5330 Appliance contains six PCIe slots, which
are populated according to five different supported configurations. The PCIe slot
configuration determines the number of Ethernet ports that are available on your
appliance.
Figure 1-6 shows where each Ethernet port is located on the rear panel of the
appliance.
NetBackup 5330 Appliance Ethernet port locations
Figure 1-6
NetBackup 5330
eth0 eth1 eth2
All NetBackup 5330 Appliances include the following ports, which are built in along
the base of the rear panel:
1-Gb ports: eth0, eth1, eth2, and eth3
■
10-Gb ports: eth4 and eth5
■
Slot 2 Slot 3
10 Gb 10 Gb
Ethernet Ethernet
10 Gb 10 Gb
Ethernet Ethernet
10 Gb 10 Gb
Ethernet Ethernet
8 Gb FC 10 Gb
HBA Ethernet
8 Gb FC 8 Gb FC
HBA HBA
eth7 eth6
PCIe-3
eth9 eth8
PCIe-2
PCIe-1
eth3
NetBackup 5330 Appliance overview
About the NetBackup 5330 Appliance
Slot 4 Slot 5
FC HBA 10 Gb
Ethernet
FC HBA 10 Gb
Ethernet
FC HBA 8 Gb FC
HBA
FC HBA 8 Gb FC
HBA
FC HBA 8 Gb FC
HBA
on page 16.
eth13 eth12
PCIe-6
eth11 eth10
PCIe-5
PCIe-4
eth4 eth5
16
Slot 6
10 Gb
Ethernet
8 Gb FC
HBA
8 Gb FC
HBA
8 Gb FC
HBA
8 Gb FC
HBA