GARDASOFT TR-HT2 Series User Manual page 76

Error number Reason
Err 40, 41, 45
Fatal
was expected.
Err 42 The output current is too high.
Err 43 The requested output current requires too high a
voltage.
Err 44 Fatal
thermal cut out which operates at approximately
65°C to 70°C depending on conditions.
Err 46 The maximun average power output has been
exceeded. Reduce the brightness in the
configuration.
Err 47 The controller was unable to reach a stable output
for this light. Try reducing the brightness in the
configuration.
TR-HT2xx LED Controller - User Manual
error: The unit is outputting more current than
error: The TR-HT is too hot. The unit has a
— 76 —