Editing And Saving Your Original Effect Type - Yamaha DGX-670 Reference Manual

Editing and Saving Your Original Effect Type

1
Once you've selected an Effect Block and Effect Type in the previous section, use the
[8 ] (Detail) buttons to call up the display for editing the effect parameters.
2
Use the [2 ]–[4 ] (Parameter) buttons to select a parameter, and then use the
[5 ]/[6 ] (Value) buttons to edit the value.
When Reverb, Chorus, or DSP1 is selected as the Effect Block, you can adjust the Return Level via the
[7 ] (Effect Return Level) buttons.
3
Press one of the [8 ] (Save) buttons to call up the User Effect display for the Save
operation.
4
Use the [2 ]–[5 ] (Memory) buttons to select the destination for saving the
settings as a User Effect.
If necessary, change the User Effect name. Press one of the [6 ] (Rename) buttons to call up the
Character Entry window, enter the name, and then press the [8 ] (OK) button.
8
5
Press the [8 ] (OK) button to carry out the Save operation.
To return to the previous display, press the [EXIT] button.
To call up the User Effect saved here, select the User category of the corresponding Effect Block in step 4
on page 69.
70
DGX-670 Reference Manual
2 3