Table of Contents
Advertisement
4 REVERB
Determines the amount of reverb applied to the Organ
Flute Voice. When the panel REVERB control is set to the
minimum, the setting here will have no effect.
Reference page
• Reverb (page 46)
5 VOLUME
Determines the overall volume of the Organ Flute Voice.
The volume balance of the individual footages is
maintained. A minimum setting here produces no Organ
Flute sound.
5
Press the [VIBRATO] button in the upper
right on the display, then set the related
parameters.
VIBRATO Page
1
1
1 -1 1 -2 1 -3
1 VIBRATO
The Vibrato function wavers the level of the Voices,
making them sound warmer and more animated. This
effect is applied independently to each Voice section.
1 -1 ON/OFF
Turns on or off the Vibrato effect.
1 -2 DEPTH
Determines the intensity of the Vibrato effect.
Higher settings result in a more pronounced vibrato.
Range: 1 – 3
1 -3 SPEED
Determines the speed of the Vibrato effect. Higher
settings increase the speed of the vibrato.
Range: 0 – 63
6
Press the [EFFECT] button at the top
right of the display for the Rotary
Speaker settings.
EFFECT Page
1
2
1 EFFECT TYPE
Selects the Rotary Speaker (tremolo) effect type. Press the
EFFECT TYPE button to call up a list of the effect types.
Select the desired type from the list.
To abort the operation, press the [CLOSE] button.
Reference pages
• Effect List (page 54)
• Rotary Speaker (page 49)
Select the desired effect type
2 Effect Parameters
Effect parameters are displayed corresponding to the
selected effect type.
7
Press one of the Organ Flutes buttons
(UPPER or LOWER) to cancel the Organ
Flute function (the lamp above the
button turns off).
ELS-02/ELS-02C Owner's Manual
3
41
Advertisement
Table of Contents
