Editing Effect Parameters (Chorus/Reverb); Editing Pan/Volume Settings (Pan/Volume); Editing And Saving The Chorus/Reverb Settings - Yamaha Genos Reference Manual

Editing Effect Parameters (Chorus/Reverb)

As described in the previous section, Chorus and Reverb are System Effects which are applied to the entire sound of
the instrument. They are not available when the "Master" tab is selected at the top of the Mixer display.
Chorus
Reverb
NOTE
For details about the Chorus and Reverb types, refer to the Data List (Effect Type List) on the website.

Editing and Saving the Chorus/Reverb settings

Same as the operation on the "Effect" display

Editing Pan/Volume Settings (Pan/Volume)

You can adjust the Pan (stereo position of the sound) and Volume for each Part. This display is not available when the
"Master" tab is selected at the top of the Mixer display.
q
Pan
w
Volume
Touch the Chorus type name at the top right of this row to select the desired Chorus type. After
selecting, return to the Mixer display then use each knob to adjust the Chorus depth for each part.
Touch the Reverb type name at the top right of this row to select the desired Reverb type. After
selecting, return to the Mixer display then use each knob to adjust the Reverb depth for each part.
(page 119).
Determines the stereo position of each part (channel).
Determines the level of each part or channel, giving you fine control over the balance of all the
parts.
q
w
Genos Reference Manual
10
121