Installing The Lcd With Bezel And The Display Back Cover Assembly - Dell Latitude 7424 Rugged Extreme Service Manual

5. Peel off the tape on the LCD connections [1] and open the connector [2] to disconnect the EDP cable [3] from the LCD.
6. Peel off the tape on touch connector [4] and disconnect the EDP cable from the connector [5].

Installing the LCD with bezel and the display back cover assembly

1. Replace the EDP cable [1] on the LCD connector and close the actuator [2].
2. Secure the connector using a piece of tape [3] .
3. Connect the touch controller cable [4] and use insulation tape on the connector [5].
104 Removing and installing components