Steps
1. Connect the battery cable to the connector on the battery.
2. Route the battery cable through the routing guides on the battery.
Next steps
1. Install the battery.
2. Install the
microSD
card.
3. Install the
base
cover.
4. Follow the procedure in
Assembly inner frame
Removing the assembly inner frame
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the
wireless
card.
About this task
The following images indicate the location of the assembly inner frame and provide a visual representation of the removal
procedure.
After working inside your
Before working inside your
card.
computer.
computer.
Removing and installing components
31