To Change The Cruising Speed - Subaru Impreza 2016 Manual

& To change the cruising speed
! To increase the speed (by the "RES/
SET" switch)
Except XV models
XV models
Press the RES/SET switch to the RES
side and hold it until the vehicle reaches
the desired speed. Then, release the
switch. The vehicle speed at that moment
will be memorized and treated as the new
set speed.
U.K. models:
When the difference between the actual
vehicle speed and the set speed is small,
the set speed can be increased by 1 mph
(1.6 km/h) each time by pressing the
RES/SET switch to the
quickly.
Except U.K. models:
When the difference between the actual
vehicle speed and the set speed is small,
the set speed can be increased by 1 km/h
(0.6 mph) each time by pressing the RES/
SET switch to the RES side quickly.
! To increase the speed (by accel-
erator pedal)
1. Depress the accelerator pedal to
accelerate the vehicle to the desired
speed.
2. Press the RES/SET switch to the
SET side once. Now the desired speed
is set and the vehicle will keep running at
that speed without depressing the accel-
erator pedal.
Starting and operating/Cruise control
NOTE
. U.K. models:
If the difference between the actual
vehicle speed when the switch is
pressed and the speed last time you
set is small, the vehicle speed will be
decreased by 1 mph (1.6 km/h). This
occurs because the cruise control
system regards this operation as that
intended to decrease the vehicle
speed.
. Except U.K. models:
RES side
If the difference between the actual
vehicle speed when the switch is
pressed and the speed last time you
set is small, the vehicle speed will be
decreased by 1 km/h (0.6 mph). This
occurs because the cruise control
system regards this operation as that
intended to decrease the vehicle
speed.
7-51
– CONTINUED –