Subaru Impreza 2016 Manual page 455

7. Secure the bottle and compressor with
Velcro to keep the bottle upright.
8. Insert the power cord of the compres-
sor into the accessory power outlet.
9. Apply the parking brake and set the
ignition switch to the ACC position.
WARNING
Running the engine in a non-venti-
lated or poorly ventilated area (e.g.,
inside a building) may cause as-
phyxiation. Do not start the engine.
10. Turn the power switch on and inject
the sealant and air.
CAUTION
. Before turning the power switch
on, check the sidewall of the tire
prior to inflation. If there are any
cracks, bumps or similar da-
mage, do not attempt to inflate
the tire. Contact your SUBARU
dealer or a road service.
In case of emergency/Flat tires
. Do not stand directly next to the
tire while the compressor is
pumping.
. Watch the sidewall of the tire
while the compressor is pump-
ing. If any cracks, bumps or
similar damage appear, turn off
the compressor. In this case, do
not continue to use the tire.
Contact your SUBARU dealer or
a road service.
11. Attach the speed limit label in the
position shown in the illustration.
WARNING
Do not attach the label to the steer-
ing wheel pad or dashboard. If the
– CONTINUED –
9-15