Starting Engine - Subaru Impreza 2016 Manual

9-30
In case of emergency/Access key – if access key does not operate properly
button start system is deactivated:
ACC
. Under other conditions: ON
5. When the keyless access with push-
button start system is deactivated, press
the push-button ignition switch with the
clutch pedal (MT models) or brake pedal
(CVT models) released. The status of the
push-button ignition switch then changes
to ON .
NOTE
If the power does not switch even
though the above procedure was fol-
lowed precisely, we recommend that
you contact your SUBARU dealer.
& Starting engine
1. Apply the parking brake.
2. Shift the shift lever in neutral (MT
models) or the select lever in the P
position (CVT models).
3. Depress the brake pedal.
4. Depress the clutch pedal (MT models).
5. Hold the access key with the buttons
facing you, and touch the push-button
ignition switch with it.
When the communication between the
access key and the vehicle is completed,
a chime (ding) will sound, and the opera-
tion indicator on the push-button ignition
switch illuminates in green. At the same
time, the push-button ignition switch turns
to the ACC or ON position.
6. Within 5 seconds after the operation
indicator illuminates in green, while de-
pressing the brake pedal (all models) and
the clutch pedal (MT models), press the
push-button ignition switch.
NOTE
If the engine does not start even
though the above procedure was fol-
lowed precisely, we recommend that
you contact your SUBARU dealer.