Multi Function Display (If Equipped); Safety Precautions - Subaru Impreza 2016 Manual

3-50
Instruments and controls/Multi function display
By operating the or
steering wheel, you can select the menu.
Pull the /SET switch to enter the
selected menu.
NOTE
If you enter the "Go Back" menu, the
system will return to the previous
screen.
! Screen Settings
After entering the Screen Settings menu,
select one of the following menus.
! Welcome Good-bye Screen
The welcome screen/good-bye screens
can be activated or deactivated. Select
On to activate the screens. Select Off
to deactivate the screens.
! Gauge Initial Movement
The movement of the meter needles and
gauge needles that occurs when the
ignition switch is turned to the ON
position can be activated or deactivated.
Select On to activate. Select Off to
deactivate.
! Languages
switch on the
Operate the
steering wheel to display the preferred
language. Then pull the
select the displayed language.
or switch on the
/SET switch to
Multi function display (if
equipped)
NOTE
For models with information display
(black and white), refer to "Information
display" F3-39.
& Safety precautions
WARNING
Always pay adequate attention to
safe driving when operating the
multi function display while the
vehicle is in motion. When operation
of the multi function display is
disturbing your awareness and abil-
ity to concentrate on driving, stop
the vehicle in a safe place before
performing operations on the
screen. Also, do not concentrate
on the display while driving. Doing
so may cause you to look away from
the road and could result in an
accident.
NOTE
When the vehicle is in motion, certain
functions and selections may not be