Self-Check Screen - Subaru Impreza 2016 Manual

Fuel consumption results screen
1) The average fuel consumption for the
entire driving distance, from when the
ignition switch was turned to the ON
position to when it was turned to the
LOCK / OFF position.
2) This display shows the average rate of
fuel consumption since the trip meter
was last reset. It displays the average
fuel consumption corresponding to the A
trip meter mileage or the one corre-
sponding to the B trip meter mileage.
3) For models with type A combination
meter and Auto Start Stop system: The
total amount of time the engine was
stopped by means of the Auto Stop
system. It is calculated from when the
ignition switch was turned to the ON
position to when the ignition switch was
turned to the LOCK / OFF position.
& Self-check screen
When the ignition switch is turned to the
ON position, the vehicle self-check will
be performed. Though the self-check
screen is set to Off as the default setting,
if the screen is set to On , the checking
process is displayed as follows. To
change the screen setting, refer to On/
Off setting F3-85.
The screens corresponding to the follow-
ing items will appear one after another for
several seconds each.
Instruments and controls/Multi function display
Type A combination meter
1) Engine oil: Checks the interval of engine
oil replacement.
2) Brake fluid: Checks the level of brake
fluid.
3) Tires: Checks the interval of tire rotation.
4) Oil filter: Checks the interval of oil filter
replacement.
5) Inspection and maintenance: Checks the
interval of inspection and maintenance.
3-53
– CONTINUED –