Subaru Impreza 2016 Manual page 298

5-34
Audio/Audio set
! Control screen and panel
No. Function
&
Select to display the audio source
1
selection screen.
Select to display the play mode
&
currently selected. Refer to Select
2
play mode F5-35.
&
Select to display iPod List. Refer to
3 iPod settings F5-35.
&
Shows progress.
4
&
Select to display the sound setting
5 screen. Refer to Unit settings F5-18.
&
Turn to adjust volume.
6
Press to turn the audio system on/off.
Turn to select a track/file.
&
Press to select an audio source. Refer
7
to Selecting an audio source F5-17.
No. Function
& Press to select a track/file.
8
Press and hold to fast forward/rewind.
NOTE
. When an iPod is connected using a
genuine iPod cable, the iPod starts
charging its battery.
. When an iPod is connected and the
audio source is changed to iPod mode,
the iPod will resume playing from the
same point it was last used.
. Depending on the iPod that is con-
nected to the system, certain functions
may not be available.
. Files/tracks selected by operating a
connected iPod may not be recognized
or displayed properly.
! Connecting the iPod
You can connect an iPod to the vehicle
USB port using the USB cable. Refer to
Connecting and disconnecting a USB
memory/portable device F5-16.
! How to change the source
The iPod operation screen can be
reached by the following methods:
. Connect an iPod. Refer to Connecting
and disconnecting a USB memory/porta-
ble device F5-16.
. Select the
USB/iPod
source select screen. Refer to Selecting
an audio source F5-17.
key on the