Subaru Impreza 2016 Manual page 329

again.
! Voice command example: Call
name
1. Press the talk switch.
2. Say "Call <contacts>" .
. A confirmation screen will be dis-
played showing the recognition re-
sults. If multiple matching items are
found, a selection screen will be
displayed. Say "<number>" or select
the number.
NOTE
. In the same manner as it is dis-
played on the screen, "Call <con-
tacts>" (Call <contacts>), after saying
"Call a contact" say the name of a
contact. For example: "Call a contact" ,
"John Smith" or "Call a contact" ,
"Mary Davis"
. Short or abbreviated names in the
contacts list may not be recognized.
Change names in the contacts list to
full names.
. Sometimes a voice recognition re-
sult confirmation screen will be dis-
played. After confirming the result, say
"Yes" or "No" .
. When the system recognizes multi-
ple names from the contacts list, a
name candidate list will be displayed
on the screen. If the desired name is
not displayed on the top of the screen,
say or select the number of the name
from the candidate list (number 1,
number 2, etc.) to select a name from
the candidate list.
. When a contact has multiple phone
numbers registered in the contacts list,
a candidate list will be displayed. If the
desired phone number is not displayed
on the top of the screen, say or select
the number of the desired phone
number from the candidate list (num-
ber 1, number 2, etc.) to select a phone
number from the candidate list.
! Voice command example: Dial
number
1. Press the talk switch.
2. Say "Dial number" .
3. Say "Dial <number>" .
For example, if the phone number is
2345678:
Say "two three four five six seven
eight"
Do not say "twenty three forty five sixty
seven eight"
4. Say "Dial" or press the off hook switch
on the steering wheel.
Audio/Voice command system
NOTE
. When the system recognizes multi-
ple phone numbers, a phone number
candidate list will be displayed on the
screen. Pressing the off hook switch on
the steering wheel makes a call to the
top entry on the list. If the desired
phone number is not displayed on the
top of the screen, say the number of
the desired phone number from the
candidate list to select a phone number
from the candidate list.
. As the system cannot recognize
additional numbers, say the complete
number without stopping.
! Casual speech recognization
Due to natural language speech recogni-
tion technology, this system enables re-
cognition of a command when spoken
naturally. However, the system cannot
recognize every variation of each com-
mand. In some situations, it is possible to
omit the command for the procedure and
directly state the desired operation. Not all
voice commands are displayed in the
function menu.
NOTE
If the command cannot be recognized
completely, the command input screen
will be displayed. (Search results will
– CONTINUED –
5-65