Subaru Impreza 2016 Manual page 411

automatically stopped.
If you release the brake pedal with the
select lever in the D position, the engine
will be automatically restarted.
! Restarting the engine after it has
been temporarily stopped by the
Auto Start Stop system
CAUTION
While the engine is temporarily
stopped by the Auto Start Stop
system, if the engine does not
restart, even if you release the brake
pedal (CVT models) or you fully
depress the clutch pedal (MT mod-
els), we recommend that you have
your vehicle i nspected by a
SUBARU dealer as soon as possi-
ble.
NOTE
. When the engine has been restarted
by the Auto Start Stop system, the
voltage of the accessory power outlets
will be reduced. Because of this, the
power of any electrical appliances that
are connected may be temporarily
turned off.
. If any door other than the driver's
door is left open for a period of time, or
if you release the brake pedal, the
engine will not be restarted even if the
door is closed.
If any one of the conditions for Auto Start
Stop operation can no longer be met, the
engine will be automatically restarted.
However, in order to ensure safety, the
engine will not be automatically restarted if
any of the following operations is per-
formed, even if you release the brake
pedal (CVT models) or fully depress the
clutch pedal (MT models).
. the engine hood is opened
. the driver s seat seatbelt is unfastened
. the driver s door is opened
Auto Start Stop warning light (yellow) (type
A)
Starting and operating/Auto Start Stop system
Auto Start Stop warning light (yellow) (type
B)
When the engine is temporarily stopped
by the system, the Auto Start Stop
warning light will illuminate in yellow if
any of the previous operations are per-
formed.
Also, in the following cases, the length of
time that the engine is temporarily stopped
by the Auto Start Stop system may be
shorter.
. when the outside temperature is high,
or when it is low (because the air condi-
tioner can no longer maintain the set
temperature)
. when consumption of electricity by
electrical components is high
7-55
– CONTINUED –