Meters And Gauges; Combination Meter Illumination; Canceling The Function For Meter/Gauge Needle Movement Upon Turning On The Ignition Switch - Subaru Impreza 2016 Manual

your vehicle under emergency conditions.
The hazard warning flasher works with the
ignition switch in any position.
To turn on the hazard warning flasher,
press the hazard warning button on the
instrument panel. To turn off the flasher,
press the button again.
NOTE
When the hazard warning flasher is on,
the turn signals do not work.

Meters and gauges

NOTE
Some of the meters and gauges on the
combination meter use liquid-crystal
displays. You will find their indications
hard to see if you wear polarized
glasses.
& Combination meter illumina-
tion
When the ignition switch is turned to the
ON position, various parts of the combi-
nation meter will illuminate in the following
sequence.
1. Warning lights, indicator lights, meter
needles, gauge needles and liquid crystal
display illuminate.
2. Meter and gauge indications each
show MAX position.
3. Meter and gauge indications each
show MIN position.
4. Regular illumination (for driving) be-
gins.
NOTE
This sequence of operations may not
take place if you quickly turn the
ignition switch to start the engine. This
Instruments and controls/Meters and gauges
is not a malfunction.
& Canceling the function for
meter/gauge needle move-
ment upon turning on the
ignition switch
It is possible to activate or deactivate the
movement of the meter needles and
gauge needles that takes place when the
ignition switch is turned to the ON
position.
! Type A combination meter
To change the setting, perform the follow-
ing procedure.
1. Turn the ignition switch to the LOCK /
OFF or ACC position.
1) Trip knob (left-hand drive models)
2) Trip knob (right-hand drive models)
3-9
– CONTINUED –