Select Lever - Subaru Impreza 2016 Manual

provides superior transmission effi-
ciency for maximum fuel economy. At
times, depending on varying driving
conditions, a chain operating noise
may be heard that is characteristic of
this type of system.
& Select lever
1) Select lever button
Starting and operating/Continuously variable transmission
1) Models with L position
2) Models with manual mode
: With the brake pedal depressed, shift
while pressing the select lever button
in.
: Shift while pressing the select lever
button in.
: Shift without pressing the select lever
button.
The select lever has four positions, P ,
R , N , D and it also has an L or M
gate.
! P (Park)
This position is for parking the vehicle and
starting the engine. In this position, the
transmission is mechanically locked to
prevent the vehicle from rolling freely.
When you park the vehicle, first apply the
parking brake firmly, then shift into the P
position. Do not hold the vehicle with only
the mechanical friction of the transmis-
sion.
To shift the select lever from the P
position to any other position, you should
depress the brake pedal fully then move
the select lever. This prevents the vehicle
from lurching when it is started.
! R (Reverse)
This position is for backing the vehicle. To
shift from the N to R position, stop the
vehicle completely then move the lever to
the R position while pressing the select
lever button in.
When the ignition switch has been turned
to the LOCK / OFF position, movement
of the select lever from the N to R
position is possible for a limited time
period by depressing the brake pedal,
and then it becomes impossible. For
details, refer to Shift lock function F7-29.
! N (Neutral)
This position is for restarting a stalled
engine. In this position, the transmission is
neutral, meaning that the wheels and
transmission are not locked. Therefore,
the vehicle will roll freely, even on the
slightest incline unless the parking brake
or foot brake is applied.
Avoid coasting with the transmission in
– CONTINUED –
7-25