Windshield Wiper Blade Assembly; Windshield Wiper Blade Rubber - Subaru Impreza 2016 Manual

Hide thumbs Also See for Impreza 2016:

Table of Contents

carefully return the wiper arms

on the windshield by hand. You

should not return the wiper arms

to the windshield only by the

return spring. Otherwise, the wi-

per arms may be deformed and/

or the windshield surface may be

If you cannot eliminate the streaking even

after following this method, replace the

wiper blades using the following proce-

Maintenance and service/Replacement of wiper blades

& Windshield wiper blade as-

Do not lower the wiper arm while the

wiper blade assembly is removed.

1. Raise the wiper arm off the windshield.

Open the cover

Pull down the wiper blade

2. Remove the wiper blade assembly by

opening the cover and pulling it down in

the direction shown in the illustration.

3. Install the wiper blade assembly to the

wiper arm. Make sure that it locks in place.

4. Hold the wiper arm by hand and slowly

lower it in position.

& Windshield wiper blade rub-

1. Grasp the locked end of the blade

rubber assembly and pull it firmly until the

stoppers on the rubber are free of the

– CONTINUED –

Chapters

Table of Contents