Important Safety Instructions - LawnMaster CLGT6014A Operator's Manual

IMPORTANT SAFETY INSTRUCTIONS

WARNING
Read and understand all instructions before using this product.
Failure to follow all instructions listed below may result in electric shock, fire, and / or serious personal
injury.
■ Avoid operating the tool in a dangerous environment. Do not use the tool in damp or wet locations.
■ Do not use in the rain.
■ Keep children away. All visitors should be kept at a distance from the work area.
■ Dress properly. Do not wear loose clothing or jewelry. They can be caught in moving parts. Use of
rubber gloves and substantial footwear is recommended when working outdoors. Wear protective
hair covering to contain long hair.
■ Use safety glasses. Always use face or dust mask if operation is dusty.
■ Use the tool correctly. Do not use the tool for any job except that for which it is intended.
■ Do not force the tool. It will do the job better and with less likelihood of a risk of injury at the rate for
which it was designed.
■ Do not overreach. Keep proper footing and balance at all times.
■ Stay alert. Watch what you are doing. Use common sense. Do not operate the tool when you are
tired.
■ Disconnect the tool. Disconnect the battery from the trimmer when not in use; before servicing,
when changing accessories such as blades, and so on.
■ Store idle tools indoors. When not in use, tools should be stored indoors in a dry, and high or
locked-up place, out of reach of children.
■ Maintain the tool with care. Keep cutting edge sharp and clean for best performance and to reduce
the risk of injury. Follow instructions for lubricating and changing accessories. Inspect the cord
periodically, and if damaged, have it repaired by an authorized service center. Inspect extension
cords periodically and replace if damaged. Keep handles dry, clean, and free from oil and grease.
■ Check for damaged parts. Before further use of the tool, a guard or other part that is damaged
should be carefully checked to determine that it will operate properly and perform its intended
function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting,
and any other condition that may affect its operation. A guard or other part that is damaged should
be properly repaired or replaced by an authorized service center unless indicated elsewhere in this
manual.
■ To reduce risk of injury to persons, remove battery pack when not in use.
■ Keep guards in place and in working order.
■ Keep hands and feet away from cutting area.
■ Prevent unintentional starting. Ensure the switch is in the off-position before inserting the battery
pack, picking up or carrying the tool. Carrying the tool with your finger on the switch or energizing
the tool that has the switch on, invites accidents.
■ Use the tool only with specifically designated battery packs. Use of any other battery packs may
create a risk of injury and fire.
■ Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may
exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
■ Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids,
gases, or dust. Power tools create sparks which may ignite the dust or fumes.
4