Battery Pack And Charger - LawnMaster CLGT6014A Operator's Manual

60v max*-14" li-ion cordless grass trimmer
Hide thumbs Also See for CLGT6014A:
Table of Contents

Advertisement

Available languages

Available languages

BATTERY PACK AND CHARGER

BATTERY CHARGING
■ Use only with 60V LawnMaster® battery chargers. The battery charger supplied is specifically
designed for the lithium-ion battery used in this tool.
■ Check the power voltage! Battery chargers operate on 120V.
■ The battery is charged between 40°F (4°C) and 100°F (38°C). This ensures an optimum battery
service life.
■ Protect the battery from heat, from continuous exposure to sun, and keep away from radiation or
other heat sources. Do not leave the battery in the tool in direct sunlight over long periods.
■ The battery is supplied uncharged. To ensure full capacity of the battery, charge the battery before
using the tool for the first time. The lithium-ion battery can be charged at any time without reducing
its service life. Interrupting the charging procedure does not affect the battery.
■ Always leave it fully charged if kept in the charger for storage.
LED CHARGER STATUS
■ If the battery is not inserted into the charger, a continuous red LED light indicates that the outlet plug
is plugged into an outlet socket and the battery charger is ready for operation.
■ Charging: a flashing green LED on the charger indicates that the battery is charging normally.
■ Charged: continuous green LED on the charger indicates that the battery is ready for use.
■ Technical Issue: a flashing red LED light on the charger indicates that battery pack has a charging
problem or might be defective.
- One possible condition is the battery temperature is not within the charging temperature range
of 40°F (4°C) and 100°F (38°C) or the charging current is too high. As soon as the permitted
temperature and the charging current ranges are reached, the battery charger will automatically
switch to charging.
- If the temperature range and charging current are correct and flashing red LED light continues,
then remove and reinstall the battery pack. If the LED status repeats a second time, try to charge
another identical battery. If the battery charges normally, dispose of the defective battery pack (see
Environmental Safe Battery Disposal section).
- If the flashing red light continues after installing the second battery, the charger may be defective.
Replace with a new one.
■ After continuous or repeated charging cycles without interruption, the charger may warm up. This is
normal and does not indicate a technical defect of the battery charger.
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents