LawnMaster CLGT6014A Operator's Manual page 22

OPERATION
AFTER USE
■ Switch the product off, remove the battery pack and let it cool down.
■ Check, clean and store the product as described below.
GENERAL CLEANING
■ Clean the product with a dry cloth. Use a brush for areas that hard to reach.
■ In particular clean the air vents (11) after every use with a cloth and brush.
■ Remove stubborn dust with high pressure air (max. 3 bar).
NOTE: Do not use chemical, alkaline, abrasive or other aggressive detergents or disinfectants to clean
this product as they might be harmful to its surfaces.
■ Check for worn or damaged parts. Replace worn parts as necessary or contact an authorized
service center for repair before using the product again.
GUARD
■ Keep the guard clean and free of debris. Remove trimmings.
■ Replace the guard with a one of the same type when it's worn or shows damage.
CHARGER
If the power cord of the charger is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a safety hazard.
22