Labels - Guardian Fall Protection Arc-O-Pod Instruction Manual

Labels

1-800-466-6385
www.guardianfall.com
Arc-O-Pod
Part #: 15030
Date of Manufacture:
Prior to use, read and understand all
manufacturer's instructions provided
with equipment at time of shipment
from manufacturer.
Compliant with OSHA 1910, OSHA 1926
Subpart M, ANSI Z359.1-07, and
ANSI A10.32.12.
Rated for one worker, or two workers
during assisted rescue. Each worker must
attach to a separate connection point.
Worker capacity range
(including all equipment): 130-310 lbs.
Materials:
Powder-coated steel and aluminum.
All equipment used in combination with
Arc-O-Pod MUST be selected and deemed
compatible by a Competent Person.
Keep away from all potential hazards
including, but not limited to, heat,
electricity, chemicals, and sharp or
abrasive edges and surfaces.
Inspect prior to EACH use. Competent
Person must inspect at least every six
months.
If equipment fails inspection,
IMMEDIATELY REMOVE FROM SERVICE.
YR
20__ 20__
MO
J
F
M
A
M
J
J
A
S
O
N
D
90076 (Rev. B)
11
Distributed by Engineered Fall Protection | Sales@EngineeredFallProtection.com | (314) 492-4422 | www.EngineeredFallProtection.com
6305 S. 231st St.
Kent, WA 98032
20__ 20__ 20__
INSTALL LOCKING PIN IN
ONE OF THE HOLES
BELOW WHEN PROPER
ADJUSTMENT IS REACHED
CARABINER ATTACHMENT
POINT. USE FOR
ATTACHMENT OF
CONNECTING SUBSYSTEM
THAT LIMITS FALL ARREST
FORCES TO 1,800LBS OR
LESS. MAX. WORKER
WEIGHT MAY NOT
EXCEED 310LBS,
INCLUDING TOOLS. ONLY
ATTACH DIRECTLY
OVERHEAD.
LOCKING PIN
INSTALL THE TRIPOD
BRACKET TO THIS LEG
ONLY
85083 (Rev. D)