Guardian Fall Protection 10947 Instruction Manual

Guardian Fall Protection 10947 Instruction Manual

G-link srl

Advertisement

Quick Links

Product Name: G-Link SRL
Part #: 10947; 10993; 10994; 10995; 10996; 10997; 10998
Instruction Manual
Do not throw away these instructions!
Read and understand these instructions before using equipment!
1
1
1
2
2-3
3
4
4
5
5
6
7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 10947 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Guardian Fall Protection 10947

  • Page 1: Table Of Contents

    Product Name: G-Link SRL Part #: 10947; 10993; 10994; 10995; 10996; 10997; 10998 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction Applicable Safety Standards Worker Classifications Product Specific Applications Limitations Components and Specifications...
  • Page 2: Introduction

    Introduction Thank you for purchasing a Guardian Fall Protection G-Link SRL. This manual must be User Information read and understood in its entirety, and used as part of an employee training program as required by OSHA or any Date of First Use: applicable state agency.
  • Page 3: Product Specific Applications

    Product Specific Applications Use of equipment in unintended applications may result in serious WARNING injury or death. Maximum 1 attachment per connection point. Personal Fall Arrest: G-Link SRL may be used to support a MAXIMUM 1 Personal Fall Arrest System (PFAS) for use in Fall Arrest applications.
  • Page 4: Components And Specifications

    Components and Specifications Materials: Nylon, stainless steel, and aluminum. Part # Length Description 10947 G-Link Connector Bracket w/High Strength Carabiner 10993 6’ G-Link Dual 6’ Retractable System With Aluminum Snap Hooks 10994 11’ G-Link Dual 11’ Retractable System With Aluminum Snap Hooks 10995 11’...
  • Page 5: Installation And Use

    Installation and Use G-Link SRL MUST NEVER be used in Leading Edge (LE) applications. No free fall is allowed. ALWAYS avoid lifeline contact with sharp or abrasive edges and surfaces. In Fall Arrest applications, SRL must always be positioned at or above harness dorsal D-ring AND at or below anchor point.
  • Page 6: Inspection

    Inspection KEEP INSTRUCTIONS AVAILABLE FOR REFERENCE. Record Date of First Use. Prior to EACH use, inspect G-Link SRLs for deficiencies, including, but not limited to, corrosion, deformation, pits, burrs, rough surfaces, sharp edges, cracking, rust, paint buildup, excessive heating, alteration, broken stitching, fraying, bird-caging, and missing or illegible labels.
  • Page 7: Safety Information

    Safety Information Failure to understand and comply with safety regulations may result in serious injury or death. Regulations included herein are not all-inclusive, WARNING are for reference only, and are not intended to replace a Competent Person’s judgment or knowledge of federal or state standards. Do not alter equipment.
  • Page 8: Labels

    DO SO MAY RESULT IN SERIOUS INJURY OR DEATH! ATTACH OSHA 1910 ANSI A10.32-12 RETRACTABLES DIRECTLY TO THIS BRACKET. DO NOT USE ANY Part #: 10947; 10993; 10994; 10995; 10996; 10997; 10998 COMPONENT BETWEEN THE RETRACTABLE AND THIS BRACKET. DO NOT REMOVE LABELS Part #...

This manual is also suitable for:

109931099410995109961099710998

Table of Contents