Table of Contents
Advertisement
IBM recommends that a minimum of two people be involved in the removal of the
SANC40 cabinet from the wooden shipping crate and a moving of the SANC40 cabinet
into the designated area.
Unpacking the SANC40 cabinet
To unpack the SANC40 cabinet:
Note: A minimum of two people is required to safely uncrate the SANC40 cabinet.
1. Cut away and discard the plastic stretch wrap surrounding the SAN256N director
2. Remove the accessories box from the top of the SAN256N director shipping package
3. Cut and remove the two metal straps from around the cardboard shipping box and
Figure 18. SAN256N director shipping box
4. Unscrew and remove the four #6 x 1-5/8" drywall screws and washers securing the
5. Cut through the taped seams and open the cardboard flaps.
6. Remove the shipping cap from the top of the SANC40 cabinet.
shipping package.
by cutting the two plastic straps securing the accessories box to the SAN256N
director shipping package. Place the accessories box in a safe location until required
during chassis installation.
wooden skid.
Cardboard
Shipping Box
Pallet
cardboard shipping box to the pallet.
1/2" Wide Steel Straps (2)
Chapter 3. Installation
27
Advertisement
Table of Contents
Troubleshooting
