Tools And Test Equipment; Fibre Channel Director Tools; Fiber Optic Tools And Test Equipment; Field Replaceable Units (Frus) - IBM TotalStorage SAN256N Director 2045-N16 Installation And Maintenance Manual

Tools and Test Equipment

Tools and test equipment are required to service the SAN256N director, and to test and
services fiber optic cables and components.

Fibre Channel Director Tools

The tools contained in the standard Field Service Tool Kit are sufficient. An ESD wrist
strap is shipped with the chassis.

Fiber Optic Tools and Test Equipment

The following list of tools and test equipment is required to test and service the fiber
optics:
• Fiber Optic Power Meter - Fotec 712A or equivalent
• Fiber Optic Power Source - Fotec S770A or equivalent
• Associated Adapters
• SC Test Connectors
• SC Test Analyzers
• LC Test Connectors
• LC Test Analyzers

Field Replaceable Units (FRUs)

The SAN256N director FRUs are defined as designated assemblies that can be
removed and installed by trained Field Service personnel at the customer's site. The
following graphics show FRU locations on the SAN256N.
76
SAN256N Director 2045-N16