Attaching A Rail Assembly To A Rack Cabinet; Hole Locations In The Back Of The Rack - IBM Storwize V7000 Quick Installation Manual

Figure 8. Attaching a rail assembly to a rack cabinet
3. Align the bottom of the rail with the bottom of the two rack units. Insert the rail location pins 1
through the holes in the rack cabinet.
4. Insert a clamping screw into the rack mounting hole 2 between the rail location pins.
5. Tighten the screw to secure the rail to the rack.
6. Working from the rear of the rack cabinet, extend the rail that you secured to the front to align the
bottom of the rail with the bottom of the two rack units.
Note: Ensure that the rail is level between the front and the back.
Figure 9 shows two rack units with the back mounting holes identified.
2 Units
Figure 9. Hole locations in the back of the rack
1 Bottom rail location pin hole
v
2 Rack mounting screw hole
v
10
Storwize V7000 Version 6.1.0: Quick Installation Guide
1
3
2
1
2