Power On The Enterprise Manager Workstation Pc; External Modem Installation; Multitech Systems Multimodem Mt5634Zba - Global External Modem (North American/International Usage) - IBM TotalStorage SAN256N Director 2045-N16 Installation And Maintenance Manual

Power on the Enterprise Manager workstation PC

1. Verify that the Enterprise Manager workstation PC (computer and monitor) AC Power
2. Plug the Enterprise Manager workstation PC power cord into the customer's AC
3. Power on the Enterprise Manager workstation PC. Ensure the PC boots up, and
4. Set any other controls on the Enterprise Manager workstation PC as appropriate,

External modem installation

Note: The external modem, connected to COM 1 on the workstation, is used for RSM
• MultiTech Systems MultiModem MT5634ZBA - Global
• MultiTech Systems MultiModem MT5600BA - Global
MultiTech Systems MultiModem MT5634ZBA - global external modem
(North American/International Usage)
Use the following procedures to install the MultiTech Systems MultiModem MT5634ZBA
- global external modem, modem driver, and global wizard utility.
Installing the MultiTech MT5634ZBA - global external modem
1. Unpack the contents of the modem packing box.
2. Verify that the workstation is turned OFF during this modem installation.
3. Install the four plastic feet onto the bottom of the modem. Peel the feet from the paper
4. Using a DB-25 to DE-9 RS-232 serial cable, plug the DB-25 connector end into the
5. Plug the DE-9 connector end of the cable into Serial Port A (COM 1) of the
6. Insert the barrel-shaped power plug into the power jack on the modem. Plug the
7. Connect the customer's supplied phone line to the line port of the external modem.
switch is in the OFF position.
power receptacle.
Windows operating system is functioning properly.
e.g., monitor brightness, contrast.
applications. The internal modem, installed inside the workstation, is used for the
Call Home feature of the SAN256N director. Both modems are operational using
only one customer-supplied phone connection. Two external modem installations
are shown in this section:
carrier strip and press the feet into the recesses on the bottom of the modem.
modem.
workstation.
power module into a standard AC power wall outlet.
Chapter 3. Installation
45