Dr. Watson Error - IBM TotalStorage SAN256N Director 2045-N16 Installation And Maintenance Manual

7. Immediately insert the IBM Product Recovery CD-ROM into the CD-ROM drive. The
8. From the main menu, select the required recovery option.
9. Remove the CD-ROM, restart the workstation, and follow the startup prompts.
10. Using the User and Password names from step 9, logon onto the Windows
11. Install the Windows Service Pack (latest version).
12. Restore any system drivers.
13. Restore any network configurations.
14. Set up the monitor display resolution, via the Control Panel/Display. Set the
15. Install the Turbo TFTP for Windows software (if the workstation is used as an
16. Install the Enterprise Manager Software Package.
17. Restore the workstation's boot-up sequence (i.e.; floppy drive/hard drive/CD-ROM),

Dr. Watson error

DRWTSN32.EXE is a debugger tool that runs on the Windows operating system. It
captures application errors and logs them for diagnosis and analysis. Use the following
procedure to gathering error logs after an application error has occurred.
1. To run Doctor Watson, open either a command prompt or the Run dialog box from the
2. The Dr. Watson for Windows screen should appear.
3. Highlight the last entry in the Application Errors list at the bottom of the screen. This
4. The Log File Viewer is displayed. Next you need to copy the text to a file.
5. Select the text and copy it to the clipboard.
128
SAN256N Director 2045-N16
workstation will locate the CD-ROM and begin the recovery program.
The system will install the Windows operating system, then automatically boot and
reboot the workstation. After the second reboot is complete, you will see the
Windows Setup screen. Use the following names as the default values:
– Name: IBM
– Company: (leave blank)
– Computer: (Use the serial number located on the front bottom right of the
workstation.)
– User: Administrator
– Password: (leave blank)
workstation.
resolution to 1280 x 1024 x 65536 Colors at 85 Hertz.
Note: The actual color and frequency settings will depend on the monitor used, and
the video display module installed in the workstation.
Enterprise Manager and Server).
making sure that the CD-ROM boots-up last, after the hard drive.
DRWTSN32
Start menu, type in
will be the most current error. Click the View button.
– Press the
C +H
TRL OME
Viewer window.
, and click the OK button.
key. The mouse pointer moves to the top of the Log File