Options For Domo Back; Left Side Connection R2 - RIKA DOMO BACK Operating Manual

Options for DOMO BACK

R 3
Tip
Right / Left according to standing in front of the stove!
Nr. Connection
R1 Rear -
R2 Left side range E11319 straight flue pipe*
R3 Right side range E11318 straight flue pipe*
R4 Rear top range E14462 90° elbow with cleaning lid*
Dimensions
RH1 = RH2 = RH3
RH4
RS1
RS2
RS3
RS4
RT1
RT2
RT3
RT4
Note
Only work on the unit when the mains plug has been disconnected
and the stove has cooled completely�
Note
During assembly / dismantling do not allow objects (screws etc�) to
fall into the pellet container – they can block the screw conveyor
and damage the stove�
Note
During any conversion work, take particular care of your fingers
and any panels and stove attachments�
Select soft bases to prevent scratches to your living space furniture
and stove panels�
Note
Protect all cables and the silicone hoses inside the stove from the
heat! Improper installation can damage your stove and void your
warranty�
R 4
R1
R 2
Parts
*from the standard RIKA flue pipe
[cm] 29
[cm] 52
[cm] 30
[cm] 21
[cm] 39
[cm] 32
[cm] 1
6
[cm]
[cm] 8
[cm] 4

Left side connection R2

Remove the the left rear panel and the left side panel as described
before�
Cut along the marked perforation of the left rear wall
Cut along the marked perforation of the left side panel�
Replace the flue gas stack and the left cover against each other�
# 8
Place the correspondent flue pipe on the side� Make sure that
everything is tight!
Install the removed parts in reverse order�