Table of Contents
Advertisement
7. COMFORT OPTIONS
Room sensor, Radio room sensor
This option permits control of your stove via room temperature. You can set
both the room temperature and the heating times required. A room temperature
selected by you is observed during the heating times.
Please see the operating instructions for the option room sensor and wireless
room sensor for more detailed information.
GSM Control
Your stove can also be controlled via a mobile phone as an additional option.
Please see the operating instructions for the telephone option – GSM for more
detailed information.
Interface for various options
for various options
The ROOM SENSOR, the WIRELESS ROOM SENSOR and the PHONE OPTION
– GSM are to be connected to the interface (stove rear) using the connection
cable supplied.
(condition as delivered)
External room thermostat
Your stove has an interface on the rear wall to which you can connect a
customary room thermostat. This requires a 2-pole cable of 0.5 – 0.75 mm
cross-section that you have to connect instead of the cable bridge fitted for
delivery.
External connection cable bridge
If the control of your stove is to be assumed by an external room thermostat,
you have to connect your external room thermostat (1) instead of the standard
integrated cable bridge (2).
The connected room thermostat can be operated in either MANUAL or
AUTOMATIC MODE. In both MODES, the current set heat output is used, in
AUTOMATIC MODE the heating times set at the stove can also be activated.
You can see whether the external demand is currently activated in the INFO main
menu in submenu item Info - inputs.
If your stove receives an external demand to stop operation, it takes approx. 5
minutes until it switches off. All further settings required to your thermostat can
be taken from the respective room thermostat operating instructions.
Note
Operation is not possible unless either a cable bridge or an external room
thermostat is connected. The external demand has priority over all operating
modes (MANUAL/AUTOMATIC/COMFORT).
Option f irenet
Only for combination and pellet stoves with touch panel version V2.16 or higher.
The firenet module connects your stove to the Internet. You can operate the
stove with any Internet-enabled device (tablet, PC, Smartphone ...). So you
retrieve the operational status, various information and make your settings
remotely.
For further information, please contact your dealer.
2
Advertisement
Table of Contents
