Table of Contents
Advertisement
NTEGRA Therma Probe NanoLaboratory. Instruction Manual
5.3. Installation of the VT Thermal Exchangeable Mount
Remove the exchangeable mount. To do this:
1. Loosen retaining screw 1 (see Fig. 5-1).
1 – retaining screw; 2 – approach knob; 3 – exchangeable mount fixing screws
2. Turn the approach mechanism housing counter-clockwise to the maximum (Fig. 5-2).
3. Unscrew the three screws which fix the exchangeable mount to the base unit (see
item 3 in Fig. 5-1).
NOTE. The screws have retaining washers and cannot be removed from the
exchangeable mount.
4. Remove the exchangeable from the base unit.
18
Fig. 5-1
Fig. 5-2
Advertisement
Table of Contents
