Logging In To The Tgm550; Identifying The Tgm550 Serial Number - Avaya IG550 Installing And Configuring

Installing an IG550 Integrated Gateway using the Disk on Key
6. At the configure prompt (#), type the following commands:
set system services telnet
●
● commit
7. At the configure prompt (#), type exit.

Logging in to the TGM550

1. At the cli prompt (>), type ssh <login>@<ip_address>, where <login> is root or
another login, if previously administered, and <ip_address> is the IP address of the
TGM550, and press Enter.
The message, Are you sure you want to continue connecting? appears.
2. Enter yes.
3. At the password prompt, type the password and press Enter. Get this password from either
your project manager or your services support group.
You are now logged-in.
- If you are prompted to change the root password, change the password to a password
agreed upon with the customer administrator.

Identifying the TGM550 serial number

1. At the command line, type show system.
2. Note the serial number of the TGM550. You need the serial number later to administer the
media gateway in Communication Manager. See
28 Installing and Configuring the IG550 Integrated Gateway
Adding Media Gateways on page 128.