Table of Contents
Advertisement
Static:
a.
IP Address: Enter the IP address assigned to the LINQ8ACM(CB) by the network administrator.
b. Subnet Mask: Enter the Subnet of the network.
c.
Gateway: Enter the TCP/IP gateway of the network access point (router) being used.
Gateway configuration is required to properly receive emails from the device.
d. HTTP Port: Enter the HTTP port number assigned to LINQ8ACM(CB) module by the network
administrator to allow remote access and monitoring. The default inbound port setting is 80. HTTP is not
encrypted and unsecure. Even though HTTP can be used for remote access, it is recommended primarily for
use with LAN connections.
HTTPS Port: Enter the HTTPS port number assigned to the LINQ8ACM(CB) module by the network
e.
administrator to allow remote access and monitoring. The default inbound port setting is 443.
Being encrypted and more secure, HTTPS is highly recommended for remote access.
When HTTPS is being used it is recommended to uncheck the box next to HTTP to disable its use.
f.
When all fields are completed click the button labeled Submit.
g. Click the button labeled Reboot to save setting.
DHCP:
a.
After selecting DHCP in the Method field click the button labeled Submit. Next, click on the button labeled
Reboot to save the settings. After rebooting the LINQ8ACM(CB) will be set in the DHCP mode. The IP
address will be assigned by the router when the LINQ8ACM(CB) is connected to the network.
See the network administrator for DHCP parameters.
b. Subnet Mask: When operating in DHCP the router will assign the subnet mask values.
s.
Gateway: TCP/IP gateway of the network access point (router) being used will be displayed.
d. HTTP Port: Enter the HTTP port number assigned to the Linq8ACM module by the network
administrator to allow remote access and monitoring. The default inbound port setting is 80. HTTP is not
encrypted and unsecure. Even though HTTP can be used for remote access it is recommended primarily for
use with LAN connections.
HTTPS Port: Enter the HTTPS port number assigned to the LINQ8ACM(CB) module by the network
e.
administrator to allow remote access and monitoring. The default inbound port setting is 443.
Being encrypted and more secure, HTTPS is highly recommended for remote access.
When all additional fields are completed click the button labeled Submit.
f.
g. Click button labeled Reboot to save setting.
D. Cloud Settings:
LINQ8ACM(CB)'s cloud support is disabled by default. When cloud support is enabled, LINQ8ACM(CB) will
use cloud support to provide email notifications and offer updates when available.
Check the box next to Enable to permit event email notifications via cloud support.
Advanced Settings:
Cloud network traffic can be redirected to local servers if desired.
1. Enter local cloud server IP address in the IP Address field.
2. Enter pro ID in the Port field.
3. Check to box next to Enable.
4. Click the button labeled Submit to save setting.
When using a local could server and SSL/TLS are active, a new certificate will need to be uploaded.
Certificate Upload:
1. Click on the Certificate tab at the top of the screen.
2. Click on Select Certificate File and locate the new certificate.
3. Upload the certificate.
4. Click the button labeled Submit to save the file.
E. Email Setup:
1. Click on the Email tab to access the email settings screen.
2. Click on Outgoing tab to access the outgoing Email Settings screen.
3. Enter up to five (5) outgoing email addresses which will receive email alerts.
4. Once all emails have been entered click the Submit button to save the setting.
Email Test:
1. Click on the Test tab to access the Email Test screen.
2. Using the pulldown menu select the test message to be sent.
3. Click the Submit button to be sent the test message.
LINQ8ACM(CB)
- 13 -
Advertisement
Table of Contents
