Page 1
Access & Power Integration Trove1R Combine Altronix Power and Accessories with Access Controllers from the Industry’s Leading Manufacturers in a 2U rack enclosure Installation Guide All registered trademarks are property of their respective owners. SIGNALING More than just power. Rev. 082420 Installing Company: _______________ Service Rep.
Page 2
Altronix power supplies and accessories for access systems. A variety of backplanes offer a wide range of scalable access and power configurations. Trove1R simplifies board layout and wire management, while reducing installation and labor costs. Model Trove1R is an en- closure only, not evaluated with accessory/subassembly board configurations.Txx1R has not been evaluated by UL.
Page 3
Battery Backup: • If batteries are being used in your installation do not fit into the Trove1R unit, it is required to install a separate enclosure, UL Listed for appropriate application. Separate battery enclosure is required to have 50 cubic inches of additional open space.
Page 4
1. Remove backplane from enclosure prior to installing into rack cabinet (do not discard hardware). 2. In order to mount included UL Listed tamper switch (Altronix Model TS112 or equivalent) turn the enclosure upside down. Punch out the knockout in designated location, on the back of the unit, from outside of the drawer (Fig.
Page 5
Z Bracket Installation for Trove1R: Altronix Trove1R enclosure includes Z Bracket, a convenient and reliable wire management accessory. Hardware (included): Fig. 3 Ten (10) bolts and eight (8) lock nuts. 1. Carefully unpack Z Bracket. Do not discard hardware (included) (Fig. 3, pg. 5).
Need help?
Do you have a question about the Trove1R and is the answer not in the manual?
Questions and answers