Table of Contents
Advertisement
VR6 - Voltage Regulator
VR6 voltage regulator converts a 24VDC input into a regulated 5VDC or 12VDC output. It is specifically
designed to work with LINQ8ACM(CB) by allowing to mount the Access Power Controller directly on top of
VR6 to save enclosure space and simplify connections. Refer to VR6 Installation Guide Rev. 050517.
Power Input / Output:
• Input: 24VDC @ 1.75A – Output: 5VDC @ 6A.
• Input: 24VDC @ 3.5A – Output: 12VDC @ 6A.
Output:
• 5VDC or 12VDC regulated output.
• Output rating 6A max.
• Surge suppression.
1. Mount VR6 in the desired location/enclosure.
2. Plug-in male 8-pin connector to female 8-pin receptacle on VR6 board.
3. Fasten standoffs. Use metal standoff over mounting hole with star pattern.
4. Align 8-pin male connector with female receptacle of LINQ8ACM(CB), then mount.
5. Connect 24VDC power supply to terminal marked [+ PWR1 –] of LINQ8ACM(CB).
Thus Input 1 of LINQ8ACM(CB) is 24VDC from power supply and Input 2 is determined by VR6's settings
(5VDC or 12VDC).
6. Complete steps 4-10 (pgs. 3-4).
Fig. 3
VR6
LINQ8ACM(CB)
Overview:
Specifications:
Connecting LINQ8ACM(CB) to VR6:
+ IN --
+ OUT --
LED Indicators:
• Input and output LEDs.
Electrical:
• Operating temperature: 0ºC to 49ºC ambient.
• Humidity: 20 to 93%, non-condensing.
Mechanical:
• Product weight (approx.): 0.4 lb. (0.18 kg).
• Shipping weight (approx.): 0.5 lb. (0.23 kg).
LINQ8ACM/
LINQ8ACMCB
VR6
+ IN --
+ OUT --
- 7 -
Advertisement
Table of Contents
