Table of Contents
Advertisement
F. Network Security Settings:
1. Click on the Security tab to access the Security Settings screen.
2. Click the appropriate tab at the top of the screen for the fields to be programmed.
Policies:
Select the security warning to be displayed when logging in to the system by checking to display and unchecking
not to display the warning message.
Self-Signed Certificate Setup:
Generating a self-signed SSL Certificate and Key:
1. State: Two letter code representing the state where the organization is located.
2. Location: The city where the organization is located.
3. Organization: The legal name of the organization. This should not be abbreviated, and should include
suffixes such as Inc., Corp, or LLC.
4. Unit Name: Name of the device.
5.
Common Name: Domain name or IP address of the server. This is typically assigned by network administrator.
6. Email Address: An email address used to contact the organization.
7. After all field have been completed click on the button labeled Submit to save setting
NOTE: A self-signed SSL certificate will be generated with the information provided in the "SSL Certificate Settings"
fields. The certificate will be valid for 500 days, and time stamped with the time settings present on the LINQ8ACM(CB)
module. The date and time must be synced with the host computer before generating an SSL certificate.
Certificate Upload:
Uploading a private Certificate and Key.
1. Under Certificate upload click on Select Certificate File.
2. Locate the new certificate file.
3. Upload the certificate file.
4. Under Key upload click on Select Key File.
5. Locate the new certificate file.
6. Upload the Key file.
7. Click on the button labeled Submit file save settings
User Settings:
There are several programable user levels available.
Administrator: Has access to all functions.
Status/Setup: Has on/off control and can rename power supplies.
Network: This setting is for IT administrators.
Maintenance: Has access to modify Alerts and timer control.
Setting Up Users:
1. Click on the Users tab.
2. Click on the Add new user button the New User Form will open.
3. Enter the user Name.
4. Enter a unique password under New Password.
5. Reenter the password under Confirm Password.
6. Select the user type and the rights the user has: Read/Write (can make changes) or Read Only (view only).
A user can be setup as an administrator by clicking on MAKE ADMIN above the Submit button.
7. Click on Submit to save settings.
8. Repeat the above to add additional users.
Alerts and Report Delay Settings:
Alerts can be enabled to send a notification that an event has occurred or disabled to ignore the event and
not send a notification.
To disable an event, uncheck the Enable box next to the event to be disabled.
To re-enable the event check the box next to the event.
Events can be set to delay before reporting.
To set a report delay enter the delay time in the column under Delay Report for the associated event.
Delay time is set in seconds. All events are preprogrammed for 2 seconds.
Once all fields are completed click the button labeled Submit to save event settings.
Repeat for all other events to be programmed.
- 14 -
LINQ8ACM(CB)
Advertisement
Table of Contents
